Fanuc Power Mate i-D/H Operator Manual

8. DATA INPUT/OUTPUT
B–63174EN/03
OPERATION
454
When this screen is displayed, the program data item is selected. The soft
keys for other screens are displayed by pressing the rightmost soft key
(next–menu key). Soft key [M–CARD] represents a separate
memory card function for saving and restoring system RAM data. (See
V–8.9.7.)
[][][][][]MACRO PITCH (OPRT)
[][][][][]M–CARD (OPRT)
When a data item other than program is selected, the screen displays only
a file directory.
A data item is indicated, in parentheses, on the title line.
READ/PUNCH (PARAMETER)
No. FILE NAME SIZE DATE
O0001 N00001
0001 O0222 332010 96/04/06
0002 O1003 334450 96/05/04
0003 MACROVAR.DAT 653400 96/05/12
0004 O0003 334610 96/05/04
0005 O0001 334254 96/06/04
0006 O0002 333750 96/06/04
0007 CNCPARAM.DAT 334453 96/06/04
~ ~
Program directory display does not match bit 0 (NAM) of parameter
No.3107, or bit 4 (SOR) of parameter No.3107.
Display the following soft keys with soft key [(OPRT)].
[][][][][]F SET F READ N READ PUNCH DELETE
The operation of each function is the same as on the directory (memory
card) screen. Soft key [O SET], used for program number setting, and
the “PROGRAM NUMBER=” indication are not displayed for data items
other than program.
[F SRH] : Finds a specified file number.
[F READ] : Reads a specified file number.
[PUNCH] : Writes a file.
[N READ] : Reads a file under a specified file name.
[DELETE]: Deletes a specified file number.
NOTE
With a memory card, DNC mode operation cannot be used.
Explanations
Each data item
Program directory
display
Using each function

Leave a Reply

Your email address will not be published. Required fields are marked *