Fanuc Power Mate i-D/H Operator Manual

PROGRAMMING
(Common to Power Mate i–D and –H)
2. CONTROLLED AXES
B–63174EN/03
30
Name of
increment
system
Least input
increment
Least command
increment
Maximum
stroke
IS–A
0.01 mm
0.001 inch
0.01 deg
0.01 mm
0.001 inch
0.01 deg
999999.99 mm
99999.999 inch
999999.99 deg
IS–B
0.001 mm
0.0001 inch
0.001 deg
0.001 mm
0.0001 inch
0.001 deg
99999.999 mm
9999.9999 inch
99999.999 deg
IS–C
0.0001 mm
0.00001 inch
0.0001 deg
0.0001 mm
0.00001 inch
0.00001 deg
9999.9999 mm
999.99999 inch
9999.9999 deg
NOTE
IS–A is available for Power Mate i–H.
Combined use of the inch system and the metric system is not allowed.
There are functions that cannot be used between axes with different unit
systems. For the increment system, see the machine tool builders
manual.
Maximum stroke = Least command increment 99999999
See 2.3 Increment System.
NOTE
1 A command which causes the maximum stroke to be
exceeded cannot be specified.
2 The actual stroke varies with the machine.
2.3
INCREMENT SYSTEM
2.4
MAXIMUM STROKE

Leave a Reply

Your email address will not be published. Required fields are marked *