Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
9. EDITING PROGRAMS
OPERATION
479
All programs registered in memory can be deleted.
Procedure for Deleting All Programs
1 Select the EDIT mode.
2 Press
PROG
to display the program screen.
3 Key in address
O
.
4 Key in –9999.
5 Press edit key
DELETE
to delete all programs.
1 Set the mode select switch to EDIT.
2 Press the
PRGRM
key.
3 Key in address
O
.
4 Key in [–], [9], [9], [9], and [9] and push the
DELET
key.
Programs within a specified range in memory are deleted.
Procedure for Deleting More Than One Program by Specifying a Range
1 Select the EDIT mode.
2 Press
PROG
to display the program screen.
3 Enter the range of program numbers to be deleted with address and
numeric keys in the following format:
OXXXX,OYYYY
where XXXX is the starting number of the programs to be deleted and
YYYY is the ending number of the programs to be deleted.
4 Press edit key
DELETE
to delete programs No.XXXX to No.YYYY.
9.5.2
Deleting All Programs
Procedure for CRT/MDI
Procedure for DPL/MDI
9.5.3
Deleting More Than
One Program by
Specifying a Range
Procedure for CRT/MDI

Leave a Reply

Your email address will not be published. Required fields are marked *