Fanuc Power Mate i-D/H Operator Manual

9. EDITING PROGRAMS
B–63174EN/03
OPERATION
484
Another program can be inserted at an arbitrary position in the current
program.
Oxxxx
Before merge
B
Oyyyy
MergeA
Oxxxx
After merge
B
Oyyyy
B
A
C
C
Merge
location
Fig.9.6.4 Merging a program at a specified location
In Fig.9.6.4, the program with program number XXXX is merged with
the program with program number YYYY. The OYYYY program
remains unchanged after merge operation.
Procedure for Merging a Program
1 Perform steps 1 to 5 in V–9.6.1.
2 Check that the screen for the program to be edited is selected and press
soft key
[MERGE].
3 Move the cursor to the position at which another program is to be
inserted and press soft key [~’CRSR] or [~BTTM’](in the latter case,
the end of the current program is displayed).
4 Enter the number of the program to be inserted (with only numeric
keys) and press the
INPUT
key.
5 Press soft key
[EXEC].
The program with the number specified in step 4 is inserted before the
cursor positioned in step 3.
9.6.4
Merging a Program
Procedure for CRT/MDI
EXEC
0 9
~
~’CRSR ~BTTM’
MERGE
Numeric keys

Leave a Reply

Your email address will not be published. Required fields are marked *