10. CREATING PROGRAMS
Sequence numbers can be automatically inserted in each block when a
program is created using the MDI keys in the EDIT mode.
Set the increment for sequence numbers in parameter 3216.
Procedure for Automatic Insertion of Sequence Numbers
1 Set 1 for SEQUENCE NO. (see V–11.4.3).
2 Enter the
to display the program screen.
4 Search for or register the number of a program to be edited and move
the cursor to the
EOB (;) of the block after which automatic insertion
of sequence numbers is started.
When a program number is registered and an EOB (;) is entered with
key, sequence numbers are automatically inserted starting
with 0. Change the initial value, if required, according to step 10, then
skip to step 7.
5 Press address key
and enter the initial value of N.
7 Enter each word of a block.
Procedure for CRT/MDI