Fanuc Power Mate i-D/H Operator Manual

11. SETTING AND DISPLAYING DATA
B–63174EN/03
OPERATION
514
MDI **** *** *** 19:33:33 PATH 1
ACTUAL POSITION(ABSOLUTE) O1000 N00000
PART COUNT 15
RUN TIME 0H13M CYCLE TIME 0H 0M 0S
ACT.F 0 MM/M
X
1
0.000
Y
2
0.000
[][][][][]ABS REL ALL HNDL (OPRT)
(PARAMETER 3108#0=1)
(“Position display includes the
position of another path”.)
(TO GO)
X1 0.000
Y2 0.000
(MACHINE)
X1 1282.107
Y2 1028.259
1 Press the
POS
key.
2 The
POS
key can be used to toggle back and forth between the
WORK display and the MCHN display.
MCHN X 12345.678
Y-99999.999
WORK X 12345.678
Y-99999.999
key
POS
Bit 6 (DAL) of parameter No. 3104 can be used to select whether the
displayed values include tool length offset.
Only the coordinates for the first to fifth axes are displayed initially
whenever when there are six or more controlled axes. Pressing the
[ABS]
soft key displays the coordinates for the sixth and subsequent axes.
Procedure for DPL/MDI
Explanations
Display including
compensation values
Displaying the sixth and
subsequent axes
(Power Mate i–H)

Leave a Reply

Your email address will not be published. Required fields are marked *