Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
11. SETTING AND DISPLAYING DATA
OPERATION
515
Displays the current position of the tool in a relative coordinate system
based on the coordinates set by the operator. The current position changes
as the tool moves. The increment system is used as the unit for numeric
values. The title at the top of the screen indicates that relative coordinates
are used.
Display for the current position screen with the relative coordinate system
1 Press function key
POS
.
2 Press soft key
[REL].
3 Press the [REL] soft key one more time to display the coordinates
along axes other than the six standard axes. (for Power Mate i–H)
AUTO STRT MTN *** 09:06:35
ACTUAL POSITION(RELATIVE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M
S 0 T0000
X 123.456
Y 363.233
[][][][][]WORK REL ALL HNDL (OPRT)
See Explanations for the procedure for setting the coordinates.
AUTO **** *** *** 19:35:12 PATH 1
ACTUAL POSITION(RELATIVE) O1000 N00000
PART COUNT 15
RUN TIME 0H13M CYCLE TIME 0H 0M 0S
ACT.F 0 MM/M
X
1
0.000
Power Mate i–D
Display in two–path control
[][][][][]ABS REL ALL HNDL (OPRT)
11.1.2
Position Display in the
Relative Coordinate
System
Procedure for CRT/MDI

Leave a Reply

Your email address will not be published. Required fields are marked *