Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
11. SETTING AND DISPLAYING DATA
OPERATION
517
Procedure to Reset All Axes
1 Press soft key [(OPRT)].
2 Press soft key [ORIGIN].
3 Press soft key [ALLEXE].
The relative coordinates for all axes are reset to 0.
Bit 4 (DRL) of parameter No. 3104 can be used to select whether the
displayed values include tool length offset.
Bit 3 (PPD) of parameter No. 3104 is used to specify whether the
displayed positions in the relative coordinate system are preset to the
same values as in the workpiece coordinate system when a coordinate
system is set by a G92 command or when the manual reference position
return is made.
Only the coordinates for the first to fifth axes are displayed initially
whenever when there are six or more controlled axes. Pressing the
[ABS]
soft key displays the coordinates for the sixth and subsequent axes.
Procedure for CRT/MDI
ORIGIN
EXEC
RELABS ALL
(OPRT)
ALLEXE
Display including
compensation values
Presetting by setting a
coordinate system
Displaying the sixth and
subsequent axes
(Power Mate i–H)

Leave a Reply

Your email address will not be published. Required fields are marked *