Fanuc Power Mate i-D/H Operator Manual

11. SETTING AND DISPLAYING DATA
B–63174EN/03
OPERATION
518
Displays the following positions on a screen : Current positions of the tool
in the workpiece coordinate system, relative coordinate system, and
machine coordinate system, and the remaining distance. The relative
coordinates can also be set on this screen. See V–11.1.2 for the procedure.
Procedure for Displaying Overall Position Display Screen
1 Press function key
POS
.
2 Press soft key [ALL].
(RELATIVE)
X 246.912
Y 913.780
(WORK)
X 123.456
Y 456.890
(MACHINE)
X 0.000
Y 0.000
(DISTANCE TO GO)
X 0.000
Y 0.000
AUTO **** *** *** 09:06:35
ACTUAL POSITION O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M
S 0 T0000
[][][][][]WORK REL ALL HNDL (OPRT)
(RELATIVE)
X1 0.000
(ABSOLUTE)
X1 0.000
(MACHINE)
X1 1282.107
(DISTANCE TO GO)
X1 0.000
AUTO **** *** *** 19:36:57 PATH 1
ACTUAL POSITION O1000 N00000
PART COUNT 15
RUN TIME 0H13M CYCLE TIME 0H 0M 0S
ACT.F 0 MM/M
Power Mate i–D
Display in two–path control
[][][][][]ABS REL ALL HNDL (OPRT)
11.1.3
Overall Position
Display
Procedure for CRT/MDI

Leave a Reply

Your email address will not be published. Required fields are marked *