Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
11. SETTING AND DISPLAYING DATA
OPERATION
529
Program Nos. registered are indicated.
By setting bit 0 (NAM) of parameter No.3107 to 1, program names,
program sizes, and program update dates can be displayed on the program
directory screen.
The user can switch between the program name screen (Fig.11.3.1(a)) and
the screen that displays program sizes and update dates (Fig.11.3.1(b)) by
pressing the [DIR] soft key.
An update date is updated also when the program number is changed.
PROGRAM(NUM.) MEMORY(CHAR.)
USED: 17 4320
FREE: 46 3960
O NO. COMMENT
O0001 (MACRO–GCODE.MAIN)
O0002 (MACRO–GCODE.SUB1)
O0010 (TEST–PROGRAM.ARTHMETIC NO.1)
O0020 (TEST–PROGRAM.F10–MACRO)
O0040 (TEST–PROGRAM.OFFSET)
O0050
O0100 (INCH/MM CONVERT CHECK NO.1)
> _
MDI **** *** *** 16:52:13
PROGRAM DIRECTORY O0001 N00010
[][][][][]
PRGRM DIR (OPRT)
Fig.11.3.1(a)
PROGRAM(NUM.) MEMORY(CHAR.)
USED: 17 4320
FREE: 46 3960
O NO. SIZE(CHAR.)
O0001 360 1996–06–12 14:40
O0002 240 1996–06–12 14:55
O0010 420 1996–07–01 11:02
O0030 180 1996–08–14 09:40
O0040 1140 1996–03–25 18:40
O0050 60 1996–08–26 16:40
O0100 120 1996–04–30 13:11
> _
MDI **** *** *** 16:52:13
PROGRAM DIRECTORY O0001 N00010
[][][][][]
PRGRM DIR (OPRT)
Fig.11.3.1(b)
When bit 0 (NAM) of parameter No.3107 is set to 0, only program
numbers are displayed.
Program library list

Leave a Reply

Your email address will not be published. Required fields are marked *