Fanuc Power Mate i-D/H Operator Manual

PROGRAMMING
(Common to Power Mate i–D and –H)
4. INTERPOLATION FUNCTIONS
B–63174EN/03
38
100.0
200.00
(G91) G01X200.0Y100.0F200.0 ;
Y axis
(End position)
X axis
(Start position)
90°
(Start point)
(End point)
Feedrate is 300 deg/min
G91G01C–90.0 F300.0 ;Feed rate of 300deg/min
Examples
Linear interpolation
Feedrate for the
rotation axis

Leave a Reply

Your email address will not be published. Required fields are marked *