Fanuc Power Mate i-D/H Operator Manual

11. SETTING AND DISPLAYING DATA
B–63174EN/03
OPERATION
544
NO. NAME DATA COMMENT
500 TOOL 0.000
501 STANDARD X 0.000 *BOLT HOLE
502 STANDARD Y 0.000 CIRCLE*
503 RADIUS 0.000 SET PATTERN
504 S. ANGL 0.000 DATA TO VAR.
505 HOLES NO 0.000 NO.500–505.
506 0.000
507 0.000
ACTUAL POSITION (RELATIVE)
X 0.000 Y 0.000
VAR. : BOLT HOLE O0001 N00000
> _
MDI **** *** ***
16:05:59
[][][][][]MACRO MENU (OPRT)
4 Enter necessary pattern data and press
INPUT
.
5 After entering all necessary data, enter the AUTO mode and press the
cycle start button to start machining.
HOLE PATTERN : Menu title
An optional character string can be displayed within 12 characters.
BOLT HOLE : Pattern name
An optional character string can be displayed within 10 characters.
The machine tool builder should program character strings of menu title
and pattern name by custom macro, and load them into the program
memory.
BOLT HOLE : Pattern data title
An optional character string can be displayed within 12 characters.
TOOL : Variable name
An optional character string can be displayed within 10 characters.
BOLT HOLE CIRCLE : Comment statement
An optional character string comment can be displayed up to 12
characters/line by 8 lines.
The machine tool builder should program the character strings of variable
name and comment statement by custom macro, and load them into the
program memory.
Explanations
Explanation of the
pattern menu screen
Explanation of the
pattern data screen

Leave a Reply

Your email address will not be published. Required fields are marked *