Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
11. SETTING AND DISPLAYING DATA
OPERATION
547
When the CNC and machine are connected, parameters must be set to
determine the specifications and functions of the machine in order to fully
utilize the characteristics of the servo motor or other parts.
This chapter describes how to set parameters on the MDI panel.
Parameters can also be set with external input/output devices such as the
Handy File (see V–8).
In addition, pitch error compensation data used for improving the
precision in positioning with the ball screw on the machine can be set or
displayed by the operations under function key
SYSTEM
.
See Chapter V–7 for the diagnostic screens displayed by pressing
function key
SYSTEM
.
11.5
SCREENS
DISPLAYED BY
FUNCTION KEY
<system>
SYSTEM

Leave a Reply

Your email address will not be published. Required fields are marked *