Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
13. HELP FUNCTION
OPERATION
561
13
HELP FUNCTION
The help function displays on the CRT screen detailed information about
alarms issued in the CNC and about CNC operations. The following
information is displayed.
When the CNC is operated incorrectly or an erroneous machining
program is executed, the CNC enters the alarm state. The help screen
displays detailed information about the alarm that has been issued and
how to reset it. The detailed information is displayed only for a limited
number of P/S alarms. These alarms are often misunderstood and are
rather difficult to understand.
If you are not sure about a CNC operation, refer to the help screen for
information about each operation.
When setting or referring to a system parameter, if you are not sure of the
number of the parameter, the help screen displays a list of parameter Nos.
for each function.
Machining menus cannot be displayed with the DPL/MDI and DPL/MDI
operation package.
Help Function
1 Press the
HELP
key on the MDI panel. HELP (INITIAL MENU) screen
is displayed.
Fig.13(a) HELP (INITIAL MENU) Screen
AUTO
****
*** ***
10:10:40
HELP (INITIAL MENU) O1234 N00001
***** HELP *****
1. ALARM DETAIL
2. OPERATION METHOD
3. PARAMETER TABLE
S 0 T0000
[][][][][]
ALAM OPR PARA
The user cannot switch the screen display from the PMC screen or
CUSTOM screen to the help screen. The user can return to the normal
CNC screen by pressing the
HELP
key or another function key.
Detailed information of
alarms
Operation method
Parameter table
Procedure

Leave a Reply

Your email address will not be published. Required fields are marked *