Fanuc Power Mate i-D/H Operator Manual

13. HELP FUNCTION
B–63174EN/03
OPERATION
564
4 To determine an operating procedure for the controller, press the soft key
[OPR] key on the
HELP (INITIAL MENU) screen. The OPERATION
METHOD menu screen is then displayed. (See Fig.13 (f).)
HELP (OPERATION METHOD) O1234 N00001
1. PROGRAM EDIT
2. SEARCH
3. RESET
4. DATA INPUT WITH MDI
5. DATA INPUT WITH TAPE
6. OUTPUT
7. INPUT WITH FANUC CASSETTE
8. OUTPUT WITH FANUC CASSETTE
9. MEMORY CLEAR
AUTO
****
*** ***
Fig.13 (f) OPERATION METHOD Menu Screen
10:00:00
S 0 T0000
[][][][][]ALAM OPR PARA (OPRT)
To select an operating procedure, enter an item No. from the keyboard
then press the
[SELECT] key.
AUTO
****
*** ***
>1
Fig.13 (g) How to select each OPERATION METHOD screen
10:00:00
S 0 T0000
[][][][][]
SELECT
When “1. PROGRAM EDIT” is selected, for example, the screen in
Fig.13 (h) is displayed.
On each
OPERATION METHOD screen, it is possible to change the
displayed page by pressing the PAGE key. The current page No. is
shown at the upper right corner on the screen.
HELP (OPERATION METHOD) 01234 N00001
<< 1. PROGRAM EDIT >> 1/4
*DELETE ALL PROGRAMS
MODE : EDIT
SCREEN : PROGRAM
OPR : (O–9999) – <DELETE>
*DELETE ONE PROGRAM
MODE : EDIT
SCREEN : PROGRAM
OPR : (O+PROGRAM NUMBER) – <DELETE>
Each item
AUTO
****
*** ***
>_
Page/maximum
page
Operation
Set mode
Operation
location
Operating
procedure
Fig.13 (h) Selected OPERATION METHOD screen
10:00:00
S 0 T0000
[][][][][]ALAM OPR PARA (OPRT)
OPERATION METHOD
screen

Leave a Reply

Your email address will not be published. Required fields are marked *