Fanuc Power Mate i-D/H Operator Manual

H. LIST OF OPERATION
B–63174EN/03
APPENDIX
624
Function Operation
Function
key
Mode
SETTING
PWE=1
KEY
SW
Program clear When the
power is on
_ CRT/MDI
DELETE
Path 1 side : DELETE and 1
At 2–path control (with Power Mate i–D2)
Path 2 side : DELETE and 2
Touch panel manufactured by FANUC
Turn on the power while holding down
the top–right corner of the screen.
Display the IPL screen, then
DEL [SELECT] [YES] [EXIT]
[YES]
At 2–path control (with Power Mate i–D2)
Path 1 side:
DEL [SELECT] [YES]
1 [SELECT] [YES] [YES]
Path 2 side:
DEL [SELECT] [YES]
2 [SELECT] [YES] [YES]
Program under editing when the
power is off (PS101)
_ _
RESET
CAN
CRT/MDI
and
Touch panel manufactured by FANUC
SPCL CAN RESET
ENTER
Clearing a ladder program*
When the
power is on
CRT/MDI
X and O
Touch panel manufactured by FANUC
Turn on the power while holding down
g
the top–right corner of the screen.
Display the IPL screen, then
X [SELECT] [YES]
O [SELECT] [YES] [YES]
PMC nonvolatile memory
When the
power is on
CRT/MDI
Z and O
Touch panel manufactured by FANUC
Turn on the power while holding down
g
the top–right corner of the screen.
Display the IPL screen, then
Z [SELECT] [YES]
O [SELECT] [YES] [YES]

Leave a Reply

Your email address will not be published. Required fields are marked *