FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

6. CONNECTION OF I/O UNITS TO
MACHINE INTERFACE
B63173EN/03
170
The FANUC I/O UnitMODEL A (I/O UnitA) is a modulartype I/O
unit. It interfaces with the machine when connected to the control unit via
the I/O Link. One I/O unit can be configured by mounting the I/O
modules required for either the 5 or 10slot base unit. A variety of I/O
modules are provided so appropriate modules can be selected according
to the use, points, voltage level, current capacity, and signal
specifications.
Interface module AIF01A or AIF01B
Various I/O modules (Up to 10 modules)
Base Unit ABU05A(5 slots) or ABU10A(10 slots)
I/F12345678910
AIF01A is used for connection to FANUC I/O Link
AIF01B expands I/O UnitsA in the same group.
A
B
ø5 (mounting hole)
(80) 142
20
130
90
A B
For 5slot base unit (ABU05A) 253 238
For 10slot base unit (ABU10A) 430 415
6.10
CONNECTION OF
THE FANUC I/O
UNITMODEL A
6.10.1
Structure of FANUC I/O
UnitMODEL A
6.10.2
Outer Dimensions

Leave a Reply

Your email address will not be published. Required fields are marked *