FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
7. CONNECTION TO FA NETWORKS
215
The Ethernet board for the Power Mate i can be inserted into an FA
network of the Power Mate i. This board enables the DNC1/Ethernet
function and FOCAS1/Ethernet function.
The DNC1/Ethernet function enables the remote control and monitoring of the
CNC from a personal computer.
For details, refer to FANUC FA SYSTEM for PC WindowsNT Version,
OPERATORS MANUAL (B75044EN).
The following data can be transferred using a personal computer:
D NC program
D Directory information of tape memory
D NC file data
H Parameter
H Tool offset value
H Custom macro variable
D Alarm information
D NC system identifying information
D PMC data
H Address G, F, Y, X, A, R, T, K, C, D
The following operations can be controlled remotely using a personal
computer:
D Selection of NC program
D Deletion of NC program
The following operation can be controlled remotely using a personal
computer:
D DNC operation
The FOCAS1/Ethernet function enables the remote control and
monitoring of the CNC from a personal computer.
In addition to the DNC1/Ethernet function, the FOCAS1/Ethernet
function allows transfer of the following NC data:
For details, refer to FANUC Open CNC FOCAS1/Ethernet CNC/PMC
Data Window Library.
D Data related to the controlled axis and spindle
H Absolute position
H Relative position
H Machine position
H Distance to go
H Actual feedrate
7.4
ETHERNET BOARD
7.4.1
Overview
DNC1/Ethernet Function
NC data transfer
Remote control
Operation
FOCAS1/Ethernet
Function

Leave a Reply

Your email address will not be published. Required fields are marked *