8. CONNECTION TO SETTING AND DISPLAY UNIT
The Power Mate is used in conjunction with a stand–alone type PDP, a
stand–alone type MDI, and a picture display type stand–alone type MDI.
CN2 (PDP power
Power supply of
CN1 (video input)
Device number selec-
1 Up to 16 Power Mates can be connected to one stand–alone type PDP
and one stand–alone type MDI.
Connection is the same as for the CRT/MDI.
2 Terminating method is the same as for the CRT/MDI.
3 The stand–alone type PDP is supplied with a soft key cable. Connect this
cable to the stand–alone type MDI. Keep in mind that the length of this
cable is 450 mm when positioning these units. See Appendix A for the
comector position of the soft key cable in stand–alone type CRT.
4 The screen can be shared in the same way as for the CRT/MDI.
5 For details concerning cable J142 used to connect a Power Mate and
the stand–alone type MDI, see Subsection 8.1.2. See Section 8.1.3 for
how to attach the J45 cable for connection with multiple Power Mate
6 For details concerning cable J30 used to connect the power supply to
the stand–alone type MDI, see Subsection 8.1.5.
7 For details concerning cable J47 used to connect the stand–alone type
MDI to the device number selection switch, see Subsection 8.1.4.
ALONE TYPE PDP,
MDI, AND Power Mate