FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
8. CONNECTION TO SETTING AND DISPLAY UNIT
257
The Power Mate supports the use of a detachable LCD/MDI, which
consists of a 7.2 LCD/MDI housed in a portable dustproof case.
Power Mate
Connection
panel
Connector
panel
Device No. selection switches
Detachable LCD/MDI
Cabinet
Stabilized power
supply 24 VDC
Display link
interface
(1)No cable is provided with the detachable LCD/MDI.
(2)The customer is responsible for preparing the connector panel,
external power supply, connection panel, and device No. selection
switches.
(3)The customer is responsible for preparing all interunit connection
cables.
(4)If the ambient temperature is low, the brightness of the LCD decreases
(immediately after the power is turned on, in particular). This is due
to the characteristics of the LCD, and does not indicate a fault. As the
ambient temperature rises, the LCD becomes brighter.
8.5
CONNECTION TO A
DETACHABLE
LCD/MDI UNIT
8.5.1
Outline

Leave a Reply

Your email address will not be published. Required fields are marked *