FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
8. CONNECTION TO SETTING AND DISPLAY UNIT
259
(4)While the power is on, cables can be attached/detached to/from those
connectors on the connection panel that are shaded (
) in the above
figure. For the other connectors (such as CA50 and JD14), cables can
neither be attached nor detached while the power is on.
Device No. selec-
tion switches on
the machine oper-
ators panel
(NOTE1)
Cabinet
Detachable
LCD/MDI
Connector
panel
Shield
(Cabinet)
CA50 (03)
CA50 (06)
CA50 (01)
CA50 (02)
CA50 (04)
CA50 (15)
CA50 (16)
CA50 (09, 10)
CA50 (19, 20)
CA50 (05)
CA50 (07)
CA50 (08)
CA50 (14)
CA50 (17)
CA50 (18)
+24V
RXD
+24V
*SEL0
TXD
ATCH1
*RXD
*TXD
ATCH2
0V
FG
*SEL1
*SEL2
*SEL3
*SEL4
*SEL7
RXD
TXD
0V
*RXD
*TXD
ATCH
to DI
Power
Mate
+24V External power supply
0V24 VDC
Connection
panel
(NOTE2)
JD41(01)
JD41(02)
JD41(03)
JD41(04)
JD41(11, 12)
NOTE
1 ATCH1 and ATCH2 can be used as DI signals for detecting
whether a detachable LCD/MDI is attached to the
connection panel (See Subsec. 8.5.5). ATCH1 and ATCH2,
when unused, need not be connected.
2 To attach or detach a detachable LCD/MDI while the Power
Mate is turned on, 0V of the Power Mate must be connected
to 0V of the detachable LCD/MDI before any other line.

Leave a Reply

Your email address will not be published. Required fields are marked *