FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

8. CONNECTION TO SETTING AND DISPLAY UNIT
B63173EN/03
300
The handy operators panel type B allows the Power Mate i to use the
emergency stop feature on the handy operators panel as a part of
emergency stop features implemented on a machine tool used with the
CNC.
The specifications of this handy operators panel for a machine tool are
the same as the conventional handy operators panel (see Section 8.7)
except the following:
D The emergency stop button has two contact outputs.
D Switch A (the conventional deadmans switch enable switch) can be
used as a modal switch.
D While one of switches B (the conventional deadmans switches) is
pressed, operations with the handy operators panel can be enabled.
D With the conventional handy operators panel, when the emergency
stop button is pressed, or the deadmans switch enable switch is ON,
releasing both the deadmans switches notifies the Power Mate of the
emergency stop state through communication. With this handy
operators panel, the notification of the emergency stop state is not
performed through communication.
D The handy operators panel is assumed to be always connected to the
machine.
8.8
CONNECTION TO
THE HANDY
OPERATORS PANEL
TYPE B
8.8.1
Overview

Leave a Reply

Your email address will not be published. Required fields are marked *