FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

8. CONNECTION TO SETTING AND DISPLAY UNIT
B63173EN/03
308
This section explains how to connect an LCD with a touch panel to the
Power Mate iD/H. The LCD with a touch panel is connected to the
Power Mate iD/H via the display link. Another suppliers touch panel
can also be connected to the Power Mate iD/H. In this case, a separate
setup/display device is required for CNC maintenance. The LCD with a
touch panel can be used as a machine operators panel and also as a CNC
setup/display device.
The LCD with a touch panel has the following features:
(1)Two types of LCDs are available: a monochrome LCD with a 9.5
touch panel and a color LCD with a 10.4 touch panel.
(2)One LCD with a touch panel can be shared among multiple Power
Mate i units and i series CNCs (that support the display link). (Up to
16 CNCs can be connected.)
(3)A virtual keyboard appears on the touch panel as required, so an MDI
unit is normally unnecessary.
For the cards and functions available with the memory card interface
of the LCD with a touch panel, see Appendix F.
Name Specification Remarks
Color LCD with a touch panel A02B0259C212 10.4 display
Monochrome LCD with a touch
panel
A02B0259C211 9.5 display
Standalone type MDI for the
touch panel (English keys)
A02B0236C120#MBR
Mseries/small
Standalone type MDI for the
touch panel (symbol keys)
A02B0236C120#MBS
type keys
200 140 mm
Item Specification
Resolution 680 480 dots
Number of colors
256 colors when touch panel
application screens are used
16 colors when CNC and PMC
screens are used
Power supply
capacity
LCD with a touch
panel
DC24V"10% 0.2A
(including an instantaneous value
and ripple)
Standalone MDI
for the touch panel
Heat loss
LCD with a touch
panel
15W
Standalone MDI
for the touch panel
8.9
CONNECTION TO AN
LCD WITH A TOUCH
PANEL
8.9.1
Overview
8.9.2
Specifications

Leave a Reply

Your email address will not be published. Required fields are marked *