FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
10. CONNECTION TO PERIPHERALS
383
Power Mate i JD42
(PCREV20MDT)
Relay connector for channel 1
(DBM25S)
J146B
1 RDA 11 SDA
20V 120V
3 DRA 13 ERA
40V 140V
5 CSA 15 RSA
60V 160V
7 CDA 17 (SDB)
8 0V 18 (0V)
9 (RDB) 19
10 20
1FG 14
2 SDA 15
3 RDA 16
4 RSA 17
5 CSA 18
6 DRA 19
7 SG 20 ERA
8 CDA 21
922
10 23
11 24
12 25 +24V
13
24VDC
power supply
Relay connector (FANUC purchase specification: A02B0061K201)
S DSUB 25pin female connector: DBM25S (Japan Aviation
Electronics)
S Metal lock: D20418J2 (Japan Aviation Electronics)
Cableside connector (FANUC purchase specification: A02B0118
K895)
S DSUB 25pin male connector with a cover: DBM25P (Japan
Aviation Electronics)
S Metal lock: DBC2J9 (Japan Aviation Electronics)
24VDC power supply
Used for FANUCs 24V type I/O devices such as the Handy File
24 VDC "10% (including an instantaneous value and ripple)
This power can be supplied also via the power supply connector CP2
of the Power Mate.
The above cable is available from FANUC in a form of a punch panel (for
one channel).
The punch panel has a terminal block for connection to 24VDC power
supply. A 24VDC cable is required separately.
S Punch panel (for one channel), 1 m long: A02B0259C191
S Punch panel (for one channel), 2 m long: A02B0259C192
S Punch panel (for one channel), 5 m long: A02B0259C193
10.1.4
Details of
SingleChannel
Connection

Leave a Reply

Your email address will not be published. Required fields are marked *