FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

C. 20PIN INTERFACE CONNECTORS
AND CABLES
B63173EN/03
APPENDIX
476
Item Unit Specifications
Product No. A66L00010286
Manufacturer HITACHI CABLE, LTD.
OKI ELECTRIC CABLE., LTD.
Rating
80_C, 30V
Material Conductor,braidshielded
wire,drain wire
Strand wire of tinned annealed
copper (JIS C3152)
Insulator Heatresistant flameretardant vinyl
Sheath Oilproof, heatresistant, flamere-
tardant vinyl
Number of wires (wire ons.) Cores 6 (1 to 6) 6 (three pairs)
(7 to 9)
Con- Size mm
2
0.5 0.18
ductor
Structure Conduc-
tors
/mm
20/0.18 7/0.18
Outside diameter mm 0.94 0.54
Insula-
tor
Standard thickness
(The minimum thickness is
at least 80% of the stan-
dard thickness.)
mm 0.25 0.2
Outside diameter mm 1.50 0.94
Twisted Outside diameter mm 1.88
pair
Direction of lay Left
Pitch mm 20 or less
Lay Twist the wires at an appropriate
pitch so the outermost layer is right
twisted, and wrap tape around the
outermost layer.
Apply a cable separator as required.
Lay diameter mm 5.7
Drain Size mm
2
0.3
wire
Structure Wires/
mm
12/0.18
Outside diameter mm 0.72
Shield Element wire diameter mm 0.12
braid
Thickness mm 0.3
Braid density % 70
Outside diameter mm 6.3
Sheath Color Black
Standard thickness
(The minimum thickness is
at least 85% of the stan-
dard thickness.)
mm 1.1
Outside diameter mm 8.5Max. 9.0(1)
Standard length m 100
Packing method Bundle
Electri-
cal per-
Electric resistance
(at 20_C) (wire nos.)
W/km 39.4(1 to 6) 113(7 to 9)
for-
mance
Insulation resistance
(at 20_C)
MWkm 15
Dielectric strength (AC) V/min. 500
Flame resistance Shall pass flame resistance test
VW1SC of UL standards,
NOTE
The maximum outside diameter applies to portions other
than the drain wire.
12core cable
D Specifications

Leave a Reply

Your email address will not be published. Required fields are marked *