FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

C. 20PIN INTERFACE CONNECTORS
AND CABLES
B63173EN/03
APPENDIX
478
Item Specification
FANUC specification number A66L00010402 A66L00010403
Manufacturer Oki Electric Cable Co., Ltd.
Aconductor Bconductor Aconductor Bconductor
Conductor
Constitution
Number of conductors/mm
16/0.12
(0.18mm
2
)
3/22/0.12
(0.75mm
2
)
16/0.12
(0.18mm
2
)
7/16/0.12
(1.25mm
2
)
Typical outside diameter
(mm)
0.55 1.20 0.55 1.70
Insulation
Color White, red, black Red, black White, red, black Red, black
(polyester)
Typical thickness (mm) 0.16 0.23 0.16 0.25
Typical outside diameter
(mm)
0.87 1.66 0.87 2.20
Pair twisting
Constitution Whitered,
whiteblack, and
blackred
Whitered,
whiteblack, and
blackred
Direction of twisting Left
Typical pitch:
20 mm
Left
Typical pitch:
20 mm
Assembling
by twisting
Number of strands or
conductors
3 6 3 6
Direction of twisting Left Left
Taping Twisting is wrapped with washi, or
Japanese paper, tape.
Twisting is wrapped with washi, or
Japanese paper, tape.
Typical outside diameter
(mm)
5.7 6.9
Braided
shielding
Typical strand diameter
(mm)
0.14
Typical density (mm) 80
Drain A 12/0.18 mm wire is roughly wrapped under braided shielding.
Typical outside diameter
(mm)
6.4 7.6
Sheath
Color Black (matted)
(polyurethane)
Typical thickness (mm) 1.05 1.1
Vertical taping Vertically taped with Japanese paper tape under sheathing.
Outside diameter (mm) 8.5"0.3 9.8"0.3
Finished
Typical length (m) 100
assembly
Short size Basically not approved.
D Specifications

Leave a Reply

Your email address will not be published. Required fields are marked *