FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
F. MEMORY CARD INTERFACE
APPENDIX
497
Write
protect
switch
Battery
case
Name Function
1 Write protect
switch
Writing to the memory card can be disabled by setting the
write protect switch.
Writing is enabled. Writing is disabled.
2 Battery case A battery for data backup is housed within an SRAM
memory card.
Flash memory cards do not have a battery case.
A memory card has an insertion guide to protect against reverse insertion.
Pay attention to the orientation of the memory card.
The batteries used with FANUCsupplied SRAM memory cards were of
the CR2325 and BR2325 types.
These batteries were difficult to obtain, so the CR2025 battery was
introduced to replace these batteries in May, 1997.
By replacing the battery holder, the user can use SRAM memory cards
that used the previous batteries (CR2325 and BR2325) with the new
battery (CR2025).
SRAM memory cards
1) A87L00010150#jjj
Manufacturers model: MB98A9jj3320
Battery type
1) Before the change: CR2325 or BR2325
D Indication on the side of the memory card:
9jj3320 S000 jjj jjj
2) After the change: CR2025 or equivalent
(common battery intended for use in electronic calculators)
D Indication on the side of the memory card:
9jj3320 9157 jjj jjj
Names and functions of
components
Inserting a memory card
Battery

Leave a Reply

Your email address will not be published. Required fields are marked *