FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

F. MEMORY CARD INTERFACE
B63173EN/03
APPENDIX
498
Battery holder replacement
1) By replacing the battery holder, the user can use SRAM memory cards
that used the previous batteries (CR2325 and BR2325) with the new
battery (CR2025).
2) The battery holder set for CR2025 is available from shops handling
Fujitsu electronic devices.
D Ordering code: MB98XXXholder set09146
D Contents of the set: Battery holder (1), battery (CR2025) (1),
manual (1)
(1)While pressing down the fixing claw, pull out the battery case.
(2)Replace the battery with a new one.
Match the + mark of the battery with the + mark on the battery case.
Battery case
(3)Return the battery case to its original position, then check that the
battery operates normally.
Battery replacement

Leave a Reply

Your email address will not be published. Required fields are marked *