G. CONNECTING TWO CRT/MDI UNITS
Part No.: A20B–2000–0840
This PC board is usually mounted at the back of the CRT/MDI,
LCD/MDI, or separate MDI.
Brackets are not provided. When installing this PC board in the cabinet,
insert studs (about 10 mm long) into the clearance holes (see the figure
The interface specifications of JA1, JA2, JD13, JN1, CPD1,
and CPD2 on this PC board are the same as those for the
CRT/MDI, separate CRT, and separate MDI.
THE CRT CONTROL