FANUC Power Mate i-MODEL H CONNECTION MANUAL (HARDWARE)

B63173EN/03
6. CONNECTION OF I/O UNITS TO
MACHINE INTERFACE
59
The FANUC I/O Link can be extended to the maximum length of 200 m
with optical cables using an optical I/O link adapter.
NOTE
In the following cases, use an optical cable.
D When the cable is more than 10 meters long.
D When the cable runs between different cabinets and it is
impossible to connect the cabinets with a grounding wire
of 5.5 mm
2
or thicker.
D When there is concern that the cable is influenced by
strong noise; for example :
When there is a strong electromagnetic noise source
beside the cable such as a welding machine.
When a noise generating cable such as a power cable
runs for a long distance in parallel with the cable.
Optical connector
COP1
connector JD1 for
unit connecting
66.0
40.0
FANUC
4M3
45.0
18.0
7.0
Main body : Approx. 100 g.
Unit
Connecting
cable between
unit
JD1A
Optical I/O
link adapter
Optical
cable
Unit
JD1B
COP1
JD1
COP1
JD1
Connecting
cable between
unit
Optical I/O
link adapter
6.2.3
Connection of FANUC
I/O Link Optical Cable
External dimension of
optical I/O Link adapter
Weight of optical I/O Link
adapter
Connection
D Connection diagram

Leave a Reply

Your email address will not be published. Required fields are marked *