Fanuc Series 15i/150i-MA (Programming) Operators Manual

4.INTERPOLATION FUNCIONS PROGRAMMING B-63324EN/03
- 80 -
- Example of specifying cylindrical interpolation cutting point compensation and
normal direction control at the same time
Cutter compensation value No. 01 = 30 mm
O0002(CYLINDRICAL INTERPOLATION2) ;
N01 G00 G90 X100.0 A0 ;
N02 G01 G91 G17 X0 A0 ;
N03 G07.1 C57299 ;
N04 G01 G41 G42.1 G90 X120.0 D01 F250. ;
N05 A20.0 ;
N06 G03 X80.0 A60.0 R40.0 ;
N07 G01 X70.0 ;
N08 G02 X70.0 A70.0 R10.0 ;
N09 G01 A150.0 ;
N10 G02 X70.0 A190.0 R85.0 ;
N11 G01 X110.0 A265.0 ;
N12 G03 X120.0 A305.0 R85.0 ;
N13 G01 A360.0 ;
N14 G40 G40.1 X100.0 ;
N15 G07.1 A0 ;
N16 M30 ;
Fig.4.10 (p) Sample Program Specifying Cylindrical Interpolation Cutting
Point Compensation and Normal Direction Control at the
Same Time
Z-axis
A-axis
Y-axis
X-axis
C-axis

Leave a Reply

Your email address will not be published. Required fields are marked *