Fanuc Series 15i/150i-MA (Programming) Operators Manual

12.PROGRAM CONFIGURATION PROGRAMMING B-63324EN/03
- 274 -
12.3 PROGRAM NUMBER
The 8-digit program number function enables specification of program
numbers with eight digits following address O (1 to 99999999).
Explanation
- Disabling editing of programs
Editing of subprograms O00008000 to O00008999 and O00009000 to
O00009999 can be disabled.
Parameter
Program numbers for which editing
is disabled
NE8(No.0011#0) O00008000 to O00008999
NE9(No.2201#0) O00009000 to O00009999
- Indication-prohibited program
The indication of subprograms of the program numbers O00008000 to
O00008999 and O00009000 to O00009999 during execution can be
disabled.
Parameter
Program numbers for which editing
is disabled
ND8(No.0011#1) O00008000 to O00008999
ND9(No.2201#1) O00009000 to O00009999
- Single block stop program
For program punch by specifying a range, files are named as follows:
When punching by specifying O00000001 and O00123456:
"O00000001-G"
Parameter
Program numbers for which editing
is disabled
SB7(No.0010#3) O00007000 to O00007999
SB8(No.0010#4) O00008000 to O00008999
SB9(No.2201#2) O00009000 to O00009999
SBM(No.0010#5) All program
- External program number search
External input signals can be used to search for a program number.
A program stored in CNC memory can be selected by externally
inputting a program number, between 1 and 99999999, to the CNC.
For details, refer to the appropriate manual supplied from the machine
tool builder.
Limitation
- Limit on the number of digits
With the FANUC Floppy Cassette, no program number may be longer
than four digits.

Leave a Reply

Your email address will not be published. Required fields are marked *