Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 14.COMPENSATION FUNCTION
- 373 -
14.2 TOOL OFFSET(G45-G48)
The programmed travel distance of the tool can be increased or
decreased by a specified tool offset value or by twice the offset value.
The tool offset function can also be applied to an additional axis.
Format
G45 IP_ D_ ;Increase the travel distance by the tool
offset value
G46 IP_ D_ ;Decrease the travel distance by the tool
offset value
G47 IP_ D_ ;Increase the travel distance by twice the
tool offset value
G48 IP_ D_ ;Decrease the travel distance by twice
the tool offset value
G45 to 48 : One-shot G code for increasing or decreasing
the travel distance
IP : Command for moving the tool
D : Code for specifying the tool offset value
Programmed path
Tool center path
Tool
Workpiece

Leave a Reply

Your email address will not be published. Required fields are marked *