Fanuc Series 15i/150i-MA (Programming) Operators Manual

14.COMPENSATION FUNCTION PROGRAMMING B-63324EN/03
- 384 -
N10 X250.0 Y550.0 ; ¥¥¥¥¥¥¥¥¥¥¥¥¥¥Specifies machining from P9 to P1.
N11 G00 G40 X0 Y0 ; ¥¥¥¥¥¥¥¥¥¥¥¥¥Cancels the offset mode.
The tool is returned to the start position (X0, Y0, Z0)

Leave a Reply

Your email address will not be published. Required fields are marked *