Fanuc Series 15i/150i-MA (Programming) Operators Manual

14.COMPENSATION FUNCTION PROGRAMMING B-63324EN/03
- 458 -
14.6 TOOL COMPENSATION VALUES
Tool compensation values include tool geometry compensation values
and tool wear compensation (Fig. 14.6 (a)).
OFS
G
OFS
W
OFS
G
: Geometric compensation value
OFS
W
: Wear compensation value
Reference position
Fig.14.6 Geometric compensation and wear compensation
Tool compensation memory A, B, or C can be used.
Table14.6 (a) Setting contents tool compensation memory and tool
compensation value
Tool
compensation
value
Tool
compensation
memory A
Tool
compensation
memory B
Tool
compensation
memory C
Tool geometry
compensation
value for address D
set
Tool geometry
compensation
value for address H
Set tool geometry
compensation
values for
addresses D and H
(values can be
specified with either
address).
set
Tool wear
compensation for
value address D
set
Tool wear
compensation
value for address H
Set tool geometry
+ tool wear
compensation
values for
addresses D and
H (values can be
specified with
either address).
Set tool wear
compensation
values for
addresses D and H
(values can be
specified with either
address).
set

Leave a Reply

Your email address will not be published. Required fields are marked *