Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 14.COMPENSATION FUNCTION
- 461 -
14.7 NUMBER OF TOOL COMPENSATION SETTINGS
(1) 32 tool compensation settings
Applicable offset Nos. (D code/H code) are 0 to 32.
D00 to D32 or H00 to H32
(2) 99 tool compensation settings
Applicable offset Nos. (D code/H code) are 0 to 99.
D00 to D99 or H00 to H99
(3) 200 tool compensation settings
Applicable offset Nos. (D code/H code) are 0 to 200
D00 to D200 or H00 to H200
(4) 499 tool compensation settings
Applicable offset Nos. (D code/H code) are 0 to 499.
D00 to D499 or H00 to H499
(5) 999 tool compensation settings
Applicable offset Nos. (D code/H code) are 0 to 999.
D00 to D999 or H00 to H999

Leave a Reply

Your email address will not be published. Required fields are marked *