Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 15.PROGRAMMABLE PARAMETER INPUT (G10)
- 561 -
15 PROGRAMMABLE PARAMETER INPUT (G10)
General
The values of parameters can be entered in a lprogram. This function is
used for setting pitch error compensation data when attachments are
changed or the maximum cutting feedrate or cutting time constants are
changed to meet changing machining conditions.
Format
Format
G10L52 ; Parameter entry mode setting
N_R_ ; For parameters other than the axis type
N_P_R_ ; For axis type parameters
:
:
G11 ; Parameter entry mode cancel
Meaning of command
N_ : Parameter No. (4digids) or compensation position No. for
pitch errors compensation +10,000 (5digid)
R_ : Parameter setting value (Leading zeros can be omitted.)
P_ : Axis No. 1 to 8 (Used for entering axis type parameters)
Explanation
- Parameter setting value (R_)
Do not use a decimal point in a value set in a parameter (R_).
a decimal point cannot be used in a custom macro variable for R_either.
- Axis No.(P_)
Specify an axis number (P_) for an axis type parameter. The control
axes are numbered in the order in which they are displayed on theCNC
display.
For example, specity P2 for the control axis which is displayed second.

Leave a Reply

Your email address will not be published. Required fields are marked *