Fanuc Series 15i/150i-MA (Programming) Operators Manual

16.MEASUREMENT FUNCTIOM PROGRAMMING B-63324EN/03
- 566 -
Example
- The next block to G31 is an incremental command
Fig.16.1 (a) The next block is an incremental command
- The next block to G31 is an absolute command for 1 axis
Fig.16.1 (b) The next block is an absolute command for 1 axis
- The next block to G31 is an absolute command for 2 axes
Fig.16.1 (c) The next block is an absolute command for 2 axes
G31 G91 X100.0 F100;
Y50.0;
50.0
100.0
Skip signal is input here
Actual motion
Motion without skip signal
Y
X
G31 G90 X200.0 F100;
Y100.0;
Y100.0
Skip signal is input here
Actual motion
Motion without skip signal
X200.0
100 200 300
Actual
Motion without skip signal
Skip signal is input here
(300,100)
Y
X
100
G31 G90 X200.0 F100;
X300.0 Y100.0;

Leave a Reply

Your email address will not be published. Required fields are marked *