Fanuc Series 15i/150i-MA (Programming) Operators Manual

3.PREPARATORY FUNCTION (G FUNCTION) PROGRAMMING B-63324EN/03
- 38 -
Table3 G code list
Code Group Function
G73 Peck drilling cycle
G74 Counter tapping cycle
G76 Fine boring cycle
G80
Canned cycle cancel / external operation function
cancel / Electronic gear box synchronous cancel
(Command for hobbing machine or 1 axis)
G81
Drill cycle, stop boring /external operation function /
Electronic gear box synchronous start (Command for
hobbing machine or 1 axis)
G80.5
Electronic gear box synchronous cancel (Command for
2 axes)
G81.5
09
Electronic gear box synchronous start (Command for 2
axes)
G81.1 00 Chopping mode on
G82 Drill cycle, counter boring
G83 Peck drilling cycle
G84 Tapping cycle
G84.2 Rigid tapping cycle
G84.3 Reverse rigid tapping cycle
G85 Boring cycle
G86 Boring cycle
G87 Back boring cycle
G88 Boring cycle
G89
09
Boring cycle
G90 Absolute command
G91
03
Incremental command
G92
Setting for work coordinate system or clamp at
maximum spindle speed
G92.1
00
Workpiece coordinate system preset
G93 Inverse time feed
G94 Feed per minute
G95
05
Feed per rotation
G96 Constant surface speed control
G97
13
Constant surface speed control cancel
G98 Return to initial level in canned cycle
G99
10
Return to R-point level in canned cycle

Leave a Reply

Your email address will not be published. Required fields are marked *