Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 17.CUSTOM MACRO
- 587 -
- Automatic operation and so forth
System variable
number
System variable
name
Attribute Description
#3000 [#_ALM] W Macro alarm
#3001 [#_CLOCK1] R/W Clock 1 (Units : milliseconds)
#3002 [#_CLOCK2] R/W Clock 2 (Units : hours)
#3003 [#_CNTL1] R/W Single block stop disabled/enabled.
Auxiliary function completion signal awaited/not
awaited.
#3003 bit0 [#_M_SBK] R/W Single block stop disabled/enabled
#3003 bit1 [#_M_FIN] R/W Auxiliary function completion signal awaited/not
awaited
#3004 [#_CNTL2] R/W Feed hold enabled/disabled.
Feedrate override enabled/disabled.
Exact stop check enabled/disabled.
#3004 bit0 [#_M_FHD] R/W Feed hold enabled/disabled
#3004 bit1 [#_M_OV] R/W Feedrate override enabled/disabled
#3004 bit2 [#_M_EST] R/W Exact stop check enabled/disabled
#3006 [#_MSGSTP] W Operation stopped with a message
#3007 [#_MRIMG] R Mirror image state (DI and setting)
#3008 [#_PRSTR] R Program not being restarted/program being
restarted
- Time information
System variable
number
System variable
name
Attribute Description
#3011 [#_DATE] R Year/month/day
#3012 [#_TIME] R Hours/minutes/seconds
- Cutting time
System variable
No.
System variable
name
Attrib-
ute
Description
#3016 [#_CUTTM] R/W Reads and presets the cumulative cutting time
parameters (No. 103, No. 104).
- Number of parts
System variable
number
System variable
name
Attribute Description
#3901 [#_PRTSA] R Cumulative number of machined parts
#3902 [#_PRTSN] R Number of required parts
- Main program number
System variable
number
System variable
name
Attribute Description
#4000 [#_MAINO] R Main program number

Leave a Reply

Your email address will not be published. Required fields are marked *