Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 17.CUSTOM MACRO
- 597 -
- Tool compensation values #2000 to #2800, #10001 to #13999 (Attribute : R/W)
Compensation values can be checked by reading system variables
#2001 to #2800 and #10001 to #13999. Compensation values can be
changed by assigning desired values to the system variables.
(1) Tool compensation memory A
- When the number of compensation values does not exceed 200
Compensation
number
Variable
number
Variable name
1 #2001 [#_OFS[1]]
2 #2002 [#_OFS[2]]
3 #2003 [#_OFS[3]]
: : :
199 #2199 [#_OFS[199]]
200 #2200 [#_OFS[200]]
- When the number of compensation values exceeds 200 (The
values of the compensation numbers up to 200 can also be
referenced using #2001 to #2200.)
Compensation
number
Variable
number
Variable name
1 #10001 [#_OFS[1]]
2 #10002 [#_OFS[2]]
3 #10003 [#_OFS[3]]
: : :
998 #10998 [#_OFS[998]]
999 #10999 [#_OFS[999]]
(2) Tool compensation memory B
- When the number of compensation values does not exceed 200
Geometric WearCompensation
number
Variable
number
Variable name Variable
number
Variable name
1 #2001 [#_OFSG[1]] #2201 [#_OFSG[1]]
2 #2002 [#_OFSG[2]] #2202 [#_OFSG[2]]
3 #2003 [#_OFSG[3]] #2203 [#_OFSG[3]]
: : : : :
199 #2199 [#_OFSG[199]] #2399 [#_OFSG[199]]
200 #2200 [#_OFSG[200]] #2400 [#_OFSG[200]]

Leave a Reply

Your email address will not be published. Required fields are marked *