Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 PROGRAMMING 17.CUSTOM MACRO
- 611 -
The workpiece origin offsets of additional workpiece coordinate
systems can be handled as system variables as with a standard
workpiece coordinate system. The system variable numbers are as
follows :
Variable
number
Variable name Controlled axes Additional
workpiece
coordinate system
number
#7001
#7002
:
#7020
[#_WZP1[1]]
[#_WZP1[2]]
:
[#_WZP1[20]]
1st axis workpiece origin offset
2nd axis workpiece origin offset
:
20th axis workpiece origin offset
1
(G54.1 P1)
#7021
#7022
:
#7040
[#_WZP2[1]]
[#_WZP2[2]]
:
[#_WZP2[20]]
1st axis workpiece origin offset
2nd axis workpiece origin offset
:
20th axis workpiece origin offset
2
(G54.1 P2)
#7041
#7042
:
#7060
[#_WZP3[1]]
[#_WZP3[2]]
:
[#_WZP3[20]]
1st axis workpiece origin offset
2nd axis workpiece origin offset
:
20th axis workpiece origin offset
3
(G54.1 P3)
:
:
:
:
:
:
:
:
#7941
#7942
:
#7960
[#_WZP48[1]]
[#_WZP48[2]]
:
[#_WZP48[20]]
1st axis workpiece origin offset
2nd axis workpiece origin offset
:
20th axis workpiece origin offset
48
(G54.1 P48)
System variable number = 7000 + (coordinate system number - 1) x 20
+ axis number
Coordinate system number : 1 to 48
Axis number : 1 to 20
NOTE
A variable value greater than the number of
controlled axes is undefined.

Leave a Reply

Your email address will not be published. Required fields are marked *