Fanuc Series 15i/150i-MA (Programming) Operators Manual

B-63324EN/03 APPENDIX F.ALARM LIST
- 811 -
F.9 SP ALARM (ALARMS RELATED TO SPINDLE)
Number Message Contents
SP0001 SSPA:01 MOTOR OVERHEAT An alarm (AL-01) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0002 SSPA:02 EX DEVIATION SPEED An alarm (AL-02) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0003 SSPA:03 DC-LINK FUSE IS BROKEN An alarm (AL-03) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0004 SSPA:04 POWER SUPPLY ERROR An alarm (AL-04) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0005 SSPA:XX DECODED ALARM An alarm (AL-05) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0006 SSPA:XX DECODED ALARM An alarm (AL-06) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0007 SSPA:07 OVER SPEED An alarm (AL-07) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0008 SSPA:XX DECODED ALARM An alarm (AL-08) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0009 SSPA:09 OVERHEAT MAIN CIRCUIT An alarm (AL-09) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0010 SSPA:10 LOW VOLT INPUT POWER An alarm (AL-10) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0011 SSPA:11 OVERVOLT POWER
CIRCUIT
An alarm (AL-11) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0012 SSPA:12 OVERCURRENT POWER
CIRCUIT
An alarm (AL-12) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0013 SSPA:13 CPU DATA MEMORY
FAULT
An alarm (AL-13) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0014 SSPA:XX DECODED ALARM SP0014
An alarm (AL-14) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0015 SSPA:15 SPINDLE SWITCHING
FAULT
An alarm (AL-15) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0016 SSPA:16 RAM ERROR An alarm (AL-16) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0017 SSPA:XX DECODED ALARM An alarm (AL-17) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0018 SSPA:18 SUMCHECK ERROR
PROGRAM ROM
SP0018
An alarm (AL-18) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0019 SSPA:19 EXCESS OFFSET
CURRENT U
An alarm (AL-19) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0020 SSPA:20 EXCESS OFFSET
CURRENT V
An alarm (AL-20) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0021 SSPA:XX DECODED ALARM An alarm (AL-21) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0022 SSPA:XX DECODED ALARM An alarm (AL-22) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0023 SSPA:XX DECODED ALARM An alarm (AL-23) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0024 SSPA:24 SERIAL TRANSFER
ERROR
An alarm (AL-24) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0025 SSPA:25 SERIAL TRANSFER STOP An alarm (AL-25) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0026 SSPA:26 DISCONNECT CS
VELOCITY DETECTOR
An alarm (AL-26) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0027 SSPA:27 DISCONNECT POSITION
CODER
An alarm (AL-27) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0028 SSPA:28 DISCONNECT CS
POSITION DETECTOR
An alarm (AL-28) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.

Leave a Reply

Your email address will not be published. Required fields are marked *