Fanuc Series 15i/150i-MA (Programming) Operators Manual

F.ALARM LIST APPENDIX B-63324EN/03
- 812 -
Number Message Contents
SP0029 SSPA:29 OVERLOAD An alarm (AL-29) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0030 SSPA:30 OVERCURRENT INPUT
CIRCUIT
An alarm (AL-32) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0031 SSPA:31 MOTOR LOCK OR
DISCONNECT DETECTOR
An alarm (AL-31) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0032 SSPA:32 SIC-LSI RAM FAULT An alarm (AL-32) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0033 SSPA:33 SHORTAGE POWER
CHARGE
An alarm (AL-33) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0034 SSPA:34 ILLEGAL PARAMETER An alarm (AL-34) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0035 SSPA:35 ILLEGAL GEAR RATIO
PARAMETER
An alarm (AL-35) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0036 SSPA:36 OVERFLOW ERROR
COUNTER
An alarm (AL-36) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0037 SSPA:37 ILLEGAL SETTING
VELOCITY DETECTOR
An alarm (AL-37) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0038 SSPA:XX DECODED ALARM An alarm (AL-38) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0039 SSPA:39 ILLEGAL 1REV SIGN OF CS
DETECTOR
An alarm (AL-39) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0040 SSPA:40 NO 1REV SIGN OF CS
DETECTOR
An alarm (AL-40) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0041 SSPA:41 ILLEGAL 1REV SIGN OF
POSITION CODER
An alarm (AL-41) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0042 SSPA:42 NO 1REV SIGN OF
POSITION CODER
An alarm (AL-42) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0043 SSPA:43 DISCONNECT POSITION
CODER DEF. SPEED
An alarm (AL-43) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0044 SSPA:44 ILLEGAL A/D CONVERT An alarm (AL-44) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0045 SSPA:XX DECODED ALARM An alarm (AL-45) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0046 SSPA:46 ILLEGAL 1REV SIGN OF
SCREW CUT
An alarm (AL-46) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0047 SSPA:47 ILLEGAL SIGNAL OF
POSITION CODER
An alarm (AL-47) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0048 SSPA:XX DECODED ALARM An alarm (AL-48) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0049 SSPA:49 DEF. SPEED IS OVER
VALUE
An alarm (AL-49) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0050 SSPA:50 SYNCRONOUS VALUE IS
OVER SPEED
An alarm (AL-50) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0051 SSPA:51 LOW VOLT POWER
CIRCUIT
An alarm (AL-51) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0052 SSPA:52 ITP FAULT 1 An alarm (AL-52) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0053 SSPA:53 ITP FAULT 2 An alarm (AL-53) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0054 SSPA:54 OVERCURRENT An alarm (AL-54) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0055 SSPA:55 ILLEGAL POWER LINE An alarm (AL-55) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0056 SSPA:56 FAN FOR CONTROL
CIRCUIT IS STOP
An alarm (AL-56) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0057 SSPA:XX DECODED ALARM An alarm (AL-57) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0058 SSPA:58 MAIN CIRCUIT OVERLOAD An alarm (AL-58) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.
SP0059 SSPA:59 FAN STOP An alarm (AL-59) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle Users Manual.

Leave a Reply

Your email address will not be published. Required fields are marked *