Fanuc Series 15i/150i-MA (Programming) Operators Manual

4.INTERPOLATION FUNCIONS PROGRAMMING B-63324EN/03
- 76 -
Fig.4.10 (l) Actual Speed Indication during Circular Interpolation
- Usable G codes
(1) In any of the following G code modes, cylindrical interpolation
cutting point compensation can be specified:
G17,G18,G19: Plane selection
G22 : Stored stroke check function on
G64 : Cutting mode
G90,G91 : Absolute command programming, incremental
command programming
G94 : Feed per minute
(2) Any of the following G codes can be specified in cylindrical
interpolation cutting point compensation mode:
G01,G02 ,G03: Linear interpolation, circular interpolation
G04 : Dwell
G40,G41,G42: Cutter compensation
G40.1-G42.1 : Normal direction control
G64 : Cutting mode
G65-G67 : Macro call
G90,G91 : Absolute command programming, incremental
command programming
Z-axis
C-axis
Y-axis
Programmed path
Vs
Fc
Vce
Ve
Vcs
Tool
Fz = Fz
Fc

Leave a Reply

Your email address will not be published. Required fields are marked *