FANUC Series 16/18/160/180-Model C Connection Manual (Hardware)

B–62753EN/01
3. INSTALLATION
9
Name Heat
loss
Remarks
Basic unit (2 slots) 60W Power supply AI
Basic unit (4 slots) 60W Power supply AI
Basic unit (6 slots) 80W Power supply BI
Basic unit (8 slots) 80W Power supply BI
Main CPU board 20W
Control unit
Option 1 board 15W
Option 2 board 15W
Option 3 board 15W
I/O card (Sink type, Source type) 15–20
W
*1
Robot control board 15W
9 monochrome CRT/MDI 14W For small type
CRT/MDI and stan-
dard type CRT/MDI
9 color CRT/MDI 40W
CRT/MDI
9 monochrome PDP/MDI 20W
8.4 color LCD/MDI 20W
9.5 color LCD/MDI 20W
14 color CRT/MDI 70W
O
p
erator
s
Operator’s panel connection unit 30W
O erator s
panel
Machine operator’s panel inter-
face unit
24W
I/O Unit AIF01A, AIF01B 1.2W
AID32A, AID32B 1.2W + 0.23W number
of ON points
AID16C, AID16D 0.1W + 0.21W number
of ON points
AID32E, AID32F 0.1W + 0.23W number
of ON points
Refer to FANUC CONTROL MOTOR AMPLIFIER α Series
Descriptions (B–65162E) for heat loss of servo amplifier.
*1 : 5W for 5V type ; 0.175W per pin that is turned on for 24V.
3.5.3
Heat Loss of Each Unit

Leave a Reply

Your email address will not be published. Required fields are marked *