FANUC Series 16/18/160/180-Model C Connection Manual (Hardware)

3. INSTALLATION
B–62753EN/01
10
Table 3.6 lists the heat exchangers.Cooling fins A, B and C are not
provided with a fan. Note that a fan motor is required for any of these
cooling fins when it is used as a heat exchanger.
Table 3.6 List of Heat Exchangers
Name
Ordering
specification
Cooling
capacity
Size
Cooling fin A A02B–0053–K303 9.1W/°C 196 90 1000mm
Cooling fin B A02B–0053–K304 10.1W/°C 444 90 650mm
Cooling fin C A02B–0053–K305 25.2W/°C 560 90 970mm
Heat pipe type
heat exchanger
A02B–0094–C901 9.0W/°C 226 132 415mm
Heat exchanger for
CRT/MDI unit
A02B–0060–K401 5.0W/°C 590 86 480mm
The cooling fin is shown in Fig. 3.6.1 (a).
Viewed from cabinet mounting side
Fig. 3.6.1(a) External view of cooling fin
3.6
INSTALLING THE
HEAT EXCHANGER
3.6.1
  

Leave a Reply

Your email address will not be published. Required fields are marked *