FANUC Series 16/18/160/180-Model C Connection Manual (Hardware)

B–62753EN/01
7. CONNECTION TO CNC PERIPHERALS
179
1
FG SD RD RS CS DR SG CD
2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25
ER +24
1 RD
2 0V
3 DR
4 0V
11 SD
12 0V
13 ER
14 0V
5 CS
6 0V
7 CD
8 0V
15 RS
16 0V
17
18
9 19 +24V
CNC
JD5A, JD5B
(PCR-EV20MDT)
10 +24V 20
FG
FANUC
FLOPPY
CASSETTE
Relaying
cable
Relaying connector
Connector : DBM-25S
(JAPAN AVIATION
ELECTRONIC
INDUSTRY., LTD.)
Lock metal : D20418-J2
(JAPAN AVIATION
ELECTRONIC
INDUSTRY., LTD.)
Cable side connector
Connector : DBM-25P
(JAPAN AVIATION ELECTRONIC INDUSTRY., LTD.)
Lock metal : DDB–C2–J9
(JAPAN AVIATION ELECTRONIC INDUSTRY., LTD.)
Accessory
for FLOPPY
CASSETTE
Relaying connector signal layout
Notes
1. Machine tool builder shall furnish relay connector and relay
cable.
2. Use a unified shielded cable for the signal cable.
Recommended cable specification : A66L-0001-0041
3. Open all terminals other than illustrated.
4. Set a parameter to be able to use reader puncher interface
when connecting FANUC cassette.
The baud rate is 4800 baud.
5. Connect the FANUC cassette to either JD5A or JD5B.
Do not use both pins; the power capacity may exceed that
of +24V and blow the fuse.
7.2.4
FANUC FLOPPY
CASSETTE Connection

Leave a Reply

Your email address will not be published. Required fields are marked *