The heat pipe type heat exchanger is used for cooling the airtight cabinet
of small sized electronic devices. It is a compact, lightweight, and
heat–efficient unit. Because the fan is built–in, it is used simply by
installing it, performing the ”panel cut’ operation.
Installation format Installation type in board
Cooling ability (W/°C) 9 (50Hz when operating)
Voltage (V) 200VAC
Frequency (Hz) 50 60
Rating current (A) 0.28 0.24
Rating input (W) 28 26
Weight (kg) 4
Color Munsell signal N1.5
Heat exchanger A02B–0094–C901
A filter is installed on the outside air inhalation side.
The installation board thickness is the standard 1.6 t.
When a fan motor and filter are necessary for maintenance, prepare
Fan motor specifications
If the heat exchanger is installed near the CRT, screen distortion may
occur due to magnetic flux leakage from the fan motor.