FANUC Series 16/18/160/180-Model C Connection Manual (Hardware)

B–62753EN/01
B. EXTERNAL DIMENSIONS OF EACH CONNECTOR
261
B
    
Name
Number
of
Figure
PCR CONNECTOR (SOLDERING TYPE) Fig. 1
FI40 CONNECTOR Fig. 2
CONNECTOR CASE (HONDA PCR TYPE) Fig. 3
CONNECTOR CASE (HIROSE FI TYPE) Fig. 4
CONNECTOR CASE (FUJITSU FCN TYPE) Fig. 5
AMP CONNECTOR (1) Fig. 6
AMP CONNECTOR (2) Fig. 7
AMP CONNECTOR (3) Fig. 8
AMP CONNECTOR (4) Fig. 9
CONTACT FOR AMP CONNECTOR Fig. 10
HONDA CONNECTOR (CASE) Fig. 11
HONDA CONNECTOR (FEMALE) Fig. 12
HONDA CONNECTOR (MALE) Fig. 13
HONDA CONNECTOR (TERMINAL LAYOUT) Fig. 14
CONNECTOR MADE BY BURNDY (3 PINS, BLACK) Fig. 15
CONNECTOR MADE BY BURNDY (3 PINS, BROWN) Fig. 16
CONNECTOR MADE BY BURNDY (3 PINS, WHITE) Fig. 17
CONNECTOR MADE BY BURNDY (6 PINS, BROWN) Fig. 18
CONNECTOR MADE BY BURNDY (6 PINS, WHITE) Fig. 19
READER PUNCHER PANEL CONNECTOR Fig. 20
READER PUNCHER CONNECTOR METAL FITTING FOR LOCK Fig. 21
POWER RECEPTACLE FOR PORTABLE TAPE READER Fig. 22
CONNECTOR FOR HIROSE FLAT CABLE Fig. 23

Leave a Reply

Your email address will not be published. Required fields are marked *